Commercial Electricians: LED Retrofits Best Tips and Tricks
Are you aiming for energy savings on your next lighting project? LED lighting is an ultra-efficient light source due to its plummeting energy efficient and component prices. It is important to define the problem or the issue why you are using LED retrofit. Do you have an overlit space? What do you think are your lighting needs at present and the years to come? Until when are you planning to rent the space? Do you plan to add sensors to your commercial fixtures? All of these are important questions that need to be answered so you can choose the best lighting for your business or commercial establishment.
It is important to assess every space in your building to determine existing light levels, maintenance expectations, control requirements, and other important factors that can significantly impact your LED choices. Accounting for every light source in your business establishments or commercial building is essential. It is also important to understand the unique challenges of lighting in relation to certain special spaces with more requirements than a standard office. You can narrow your lighting options by using your assessment and audit results. One of the biggest challenges is figuring out the best fixtures that would work for awnings because there are a wide variety of awnings, and one cannot just look at the lumens per watt to be confident that the fixture will illuminate the awning from the top to the bottom. You need to ensure that every lighting fixture is tested including the color temperature that is right for your workspaces. As compared to simple exchanges, right-sized retrofits can save more money and energy for overlit areas. Installationg of the right lighting in appropriate places is important, with all retrofits replaced with the same light intensity, but not necessarily installing the same type of lamps in all areas.
Always figure out your lighting needs first, and you’ll be able to identify the right lighting solutions for your business establishment or commercial building. Experts recommend doing a mockup for all retrofitting projects most especially if the replacement lamps need to use existing sockets. Mock-up provides an assessment of the rewiring complexity for an LED retrofit lighting system, and the comparison of light distribution for one-to-one replacements is essential to determine the levels of light if it is comparable when you switch from an omnidirectional or fluorescent to a directional of the LED light source. For more details about LED retrofit, and to find the right commercial electrician who is licensed, reliable, and trusted for your LED installation, you can visit our website or homepage now so we can help you out.